high speed tool steel m42

high speed tool steel m42

High Speed Steel | M42 Tool Steel | M42 Steel

M42 Super High Speed Steel M42 super high speed steel is a premium cobalt high speed steel with a chemical composition designed for high hardness and superior hot hardness. These properties make the steel an excellent choice for machining high-strength and pre-hardened steels, high-hardness alloys, and the difficult-to-machine, nonferrous super ...

High Speed Steel - Saaj Steels Corporation | High Speed ...

High Speed Steel M42. The chemical composition of M42 molybdenum high speed tool steel is outlined in the following table.M42 tool steel can be drilled, turned, threaded, broached, milled and tapped when it is in its annealed condition and rated at 45% of 1% carbon steel.M42 molybdenum high speed tool steel is preheated to 871°C (1599°F) in a slow manner and then soaked.

High-speed steel - Wikipedia

High-speed steel (HSS or HS) is a subset of tool steels, commonly used as cutting tool material. It is often used in power-saw blades and drill bits . It is superior to the older high- carbon steel tools used extensively through the 1940s in that it can withstand higher temperatures without losing …History·

High Speed Steel | Tool Steel | Compare Tool Steel

High-speed steels exhibit high strength and hardness, but typically exhibit lower toughness than the cold work tool steels. Some, most notably M2 and powder metal M4, are used in cold work applications because of the strength and wear resistance which can be achieved.

High Speed Tool Steel Products: M2 - M4 - M42 - T1 - T15

M42 High-Speed Tool Steel M42 is a cobalt-molybdenum super high speed steel that is known for its superior red-hardness in comparison to M2 steel. The addition of cobalt to the composition of M42 provides a good balance of toughness and hardness.

Providing High Speed Steel For Over 65 Years - Griggs ...

High Speed Steel. Griggs has been providing High Speed Tool Steel to the cutting tool and forming tool industries for over 65 years. Our customers range from the largest punch, reamer drill, broach, form tool and tap manufacturers in the world to thousands of smaller shops.

M42 High Speed Steel - Alloy Steel | Griggs Steel

M42 is a molybdenum series high-speed steel alloy with an additional 8 or 10 percent cobalt. It is widely used in metal manufacturing industries because of its superior red hardness as compared to more conventional high-speed steels.

M42 High Speed Steel - West Yorkshire Steel - Established ...

M42 high speed steel stockholders and suppliers, delivering to the whole of the UK. West Yorkshire Steel are suppliers of M42 in round bar. This grade is a cobalt molybdenum high speed steel which achieves a high hardness and superior hot hardness.

M42 Tool Steel | M42 High Speed Steel | Die Steel Grade M42

M42 is a excessive-carbon, excessive-pace steel founded on molybdenum. Characterized by excessive put on resistance, red hardness and durability. For this reason of its low vanadium content, this grade reveals excellent grind ability.

M42 high speed steel - Special steel china supplier-OTAI ...

M42 High speed steel china supplier and and stockholders. Otai Special steel is supplier in round bar, plate, flat, square M42 tool steel material. The M42 High Speed Steel is known for its balanced combination of abrasion resistance, toughness and good red hardness.M42 is a tungsten-molybdenum high speed steel. it is used in a variety of ...

M42 high speed steel - Special steel china supplier-OTAI ...

M42 High speed steel china supplier and and stockholders. Otai Special steel is supplier in round bar, plate, flat, square M42 tool steel material. The M42 High Speed Steel is known for its balanced combination of abrasion resistance, toughness and good red hardness.M42 is a tungsten-molybdenum high speed steel. it is used in a variety of ...

High Speed Steel (Grades: M2,M35,M42) | P20 Steel - Hot ...

M42 is a molybdenum-series high-speed steel alloy with an additional 8% cobolt. It is widely used in metal manufacturing because of its superior red-hardness as compared to more conventional high-speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes.

AISI M42 High Speed Tool Steel - VIRAT SPECIAL STEELS …

Virat Special Steels is the largest Supplier, Stockiest, Importer and Exporter of AISI M42 High Speed Tool Steel in USA, India and Europe. Virat Special Steels is the largest Supplier, Stockiest, Importer and Exporter of AISI M42 High Speed Tool Steel in USA, India and Europe.

M-42 - Diehl Tool Steel - Specialty Metal Distributors

M-42 High Speed Tool Steel M-42 is a molybdenum-chromium-vanadium-tungsten high speed steel alloy with an additional 8% cobalt. It is widely used in metal manufacturing because of its superior red-hardness as compared to more conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool …

M42 Molybdenum High Speed Tool Steel - AZoM

M42 molybdenum high speed tool steel is preheated to 871°C (1599°F) in a slow manner and then soaked. This is followed by rapid heating to 1093°C (1999°F) and slow cooling. Temperatures below 982°C (1799°F) are not suitable for the forging process.

High Speed Steel - High Speed Steel(HSS)-M2, M35, M42, …

Tradewell Ferromet can offer M42 High Speed Steel, M42 High Speed Steel Rod, M42 Rods, M42 Round Bar, M-42 Bars HSS M42 Tool Steel, HSS M42 Die Steel, M42 Steel Bars, High Speed Steel Rod, High Speed Steel, HSS Steels from ready stock.

AISI M42 Tool Steel - High Speed Steel | Steel Bar

M42 High Speed Steel. AISI M42 Tool Steel is an important Cobalt-Molybdenum high speed tool steel with an additional 8% cobalt. This HSS grade has a high hardness and superior hot hardness. AISI M42 Steel is suitable for heat treatment up to 70 HRC, and offers excellent cutting performance.

High Speed Steel Tool Bits - West Yorkshire Steel

M42 high speed steel is a cobalt molybdenum grade with a high hardness and superior hot hardness offering excellent cutting performance and excellent wear resistance. As an 8% cobalt high speed steel type M42 tool bits are suited for tougher materials such as work hardening types. They offer increased tool life with retention of the cutting edge.

M42 high speed steel - WOODWEB

woodweb› Knowledge BaseM42 is a grade of high speed steel with a high content of cobalt in the alloy. It is less brittle than carbide steels. Similar to nickel in hardness and durability, cobalt alloy steel is …

Tool Steel

M42 High Speed Steel. A8 Air Hardening Cold Work Tool Steel. ... 1.2355 ASTM A681 S7 Tool Steel Flat Bar. SKD 12 X100CrMoV5 1.2363 AISI A2 Tool Steel Bar. High Speed Tool Steel Bars with M2 Steel Grade. About Us. Founded in 1998, FuShun covers an area of 3000 square meters, annual sales volume of 20000 tons.

M42 Tool Steel Hardened & Ground Round | Key Metals

M42 is a molybdenum high speed tool steel with 8-10% cobalt added for increased hardness and hot hardness that is superior to other high speed grades. This results in a sharper cutting edge that lasts longer, even when being used to machine high-hardness and hard-to-machine alloys in heavy duty and high production applications.

M42 High Speed Steel - Detect-metals

Product Description M42 Molybdenum High Speed Tool Steel. Equivalent grades: SKH59/W2Mo9Cr4VCo8 M42 high speed steel is a cobalt molybdenum tools steel, the addition of 8% cobalt means that M42 delivers superior red-hardness when compared to M2.

Tool Steel-High Speed Steel China Supplier - saesteel

Tungsten high speed steel is the most used high speed steel, The Tungsten composition higher than 11%. it has good comprehensive performance, have high hardness (HRC 62 ~ 66), strength, toughness and heat resistance, red hardness can reach 620 degrees Celsius.

High Speed Steel | Steel Bar

M35 High Speed Steel AISI M35 Tool Steel is a Cobalt-Type high speed tool steel. M35 steel is on the basis of M2 Steel, but with 5% Cobalt content increased …

Get In Touch24/7 Support

ADD : XICHENG SCIENCE & TECHNOLOGY BUILDING HIGH-TECH DEVELOPMENT ZONE, ZHENGZHOU, CHINA

TEL : 0086-371-86151827

FAX : 0086-371-86011881